Dixie Contractor

Dedicated to the people who make our built environment better and safer. We tell your stories and celebrate your successes.

Register with us and receive industry news and content only available to subscribers.

Subscribe
Contacts

Indianapolis, IN, USA (HQ)

903 E. Ohio St., Indianapolis, IN 46202

Call: (317) 423-2325

info@acppubs.com

AGC of Texas Celebrates Re-Opening After Major Office Renovation

Texas State Senator Robert Nichols, a long-time friend to the highway construction industry, was invited to cut the ribbon for the renovated AGC of Texas building in Austin. Others participating behind the ribbon (left to right) were Wade Miller (Big Creek Construction) AGC of Texas President-Elect; Tom Johnson, former Executive Vice President of the AGC of Texas; Stacey Bryant (Jones Bros.), AGC of Texas 2023 President; Senator Nichols; Jennifer Woodard, CEO of the AGC of Texas; and David Casteel (Williams Bros.) AGC of Texas Immediate Past President.
Texas State Senator Robert Nichols, a long-time friend to the highway construction industry, was invited to cut the ribbon for the renovated AGC of Texas building in Austin. Others participating behind the ribbon (left to right) were Wade Miller (Big Creek Construction) AGC of Texas President-Elect; Tom Johnson, former Executive Vice President of the AGC of Texas; Stacey Bryant (Jones Bros.), AGC of Texas 2023 President; Senator Nichols; Jennifer Woodard, CEO of the AGC of Texas; and David Casteel (Williams Bros.) AGC of Texas Immediate Past President.
The new entrance of the building
The new entrance of the building
Tom Johnson and Jennifer Woodard represent more than 56 years of leadership for the AGC of Texas. The AGC logo etched in granite on the entry wall was part of the original Boardroom table that was fabricated in place in 2000.  It was created by a custom granite constructor who worked in the Texas Hill Country. AGC salvaged the granite tabletop and repurposed it for the lobby wall in the remodeled office.
Tom Johnson and Jennifer Woodard represent more than 56 years of leadership for the AGC of Texas. The AGC logo etched in granite on the entry wall was part of the original Boardroom table that was fabricated in place in 2000.  It was created by a custom granite constructor who worked in the Texas Hill Country. AGC salvaged the granite tabletop and repurposed it for the lobby wall in the remodeled office.
The relocated reception area. (Photo courtesy of Studio8 Architects)
The relocated reception area. (Photo courtesy of Studio8 Architects)
Tom Johnson visits with past AGC of Texas presidents Johnny Weisman (Hunter Industries) and Bob Lanham (Williams Bros.).
Tom Johnson visits with past AGC of Texas presidents Johnny Weisman (Hunter Industries) and Bob Lanham (Williams Bros.).
The remodeled boardroom has a much brighter look with new furniture and lighter oak wall paneling. (Photo by Gary Sharrer, AGC)
The remodeled boardroom has a much brighter look with new furniture and lighter oak wall paneling. (Photo by Gary Sharrer, AGC)
The new stairwell leads to individual offices on the second floor. (Photo courtesy of Studio8 Architects)
The new stairwell leads to individual offices on the second floor. (Photo courtesy of Studio8 Architects)
After more than two years of planning and construction, the Associated General Contractors (AGC) of Texas celebrated completion of their renovated office building at 300 Barton Springs Road in Austin with a ribbon cutting ceremony August 14.

Texas State Senator Robert Nichols, a long-time friend to the highway construction industry, was invited to cut the ribbon. Senator Nichols of Jacksonville, Texas, currently serves as Chair of the Senate Committee on Transportation. Prior to being elected to the State Senate in 2006, he served on the Texas Transportation Commission for eight years from 1997 until 2005.

Senator Nichols expressed the value of the AGC of Texas, “I can’t emphasize enough how very important your agency is. The research your staff does and your connection with members out in the field is so important.”

The AGC of Texas office, built in 1980 measures approximately 8,500 square feet. Design for the remodeling project began in 2021 and construction began in fall of 2022.  The total interior remodel was designed by a Studio8 Architects team in Austin, led by Holly McKenzie IIDA, NCIDQ. Except for relocating the front entrance, only minor cosmetic enhancements were made to the exterior.

But the interior was a completely different story. A general idea to reorganize the staff’s open work area on the second floor began years ago. Once the plans began to realize, the idea morphed into a redesign of the entire first floor to provide a more spacious area for seminars and social gatherings.

Gomaco
Your local Gomaco dealer
Ring Power Corporation

“It was time for a renovation,” said David Casteel, who was 2022 AGC of Texas President during most of the renovation process. “We were not ADA compliant and with changes in technology, the building was dysfunctional for the staff. The renovation brings us into compliance and increases the usable areas.”

Turner Construction served as the general contractor for the project. Gone is the huge switchback staircase that overshadowed the large entry room. The small multi-purpose room on the south side is now the main entrance. The main entry, stairwell, and elevator were relocated to the south corner of the building, which in turn allowed the two largest rooms to be adjacent to one another. When the doors are opened between the reception, multi-purpose room, and boardroom, guests can flow through the spaces during larger functions. The dark oak wood flooring and wall paneling was replaced with a lighter toned grey quarter-cut walnut and Calcutta porcelain tile. The boardroom remains in the same location.

The project finished in late May 2023 with the staff eager to move into these beautiful new quarters after working remotely for almost a year. The second floor staff area is now organized into 12 offices, a small conference room, a mail/copier room, and a small staff break area. New furnishings throughout both floors help tie the spaces together and provide employees a more comfortable setting.

In addition to many industry members and friends, the ribbon cutting event was attended by 10 AGC of Texas Past-Presidents: David Casteel, 2022; Kal Kincaid, 2021; Trey Pebley, 2019; Seth Schulgen, 2017; Joe Forshage, 2013; Tracy Schieffer, 2008; Terry Bryant, 2005; Zack Burkett III, 1991 and 2006; Johnny Weisman, 1988 and 2003; Bob Lanham, 2000 and 2011, and AGC of America President, 2020-2021.

Bomag - Roller
Your local Bomag Americas dealer
Linder Industrial Machinery
Bomag - Roller
Your local Bomag Americas dealer
Linder Industrial Machinery
Komatsu Dealer Program
Your local Komatsu America Corp dealer
Linder Industrial Machinery
Power Equipment Co
SITECH
Your local Trimble Construction Division dealer
SITECH Mid-South
SITECH South
SITECH Tri-Rivers